This product is specially formulated for use on marble, travertine and all natural stone without any damage or etching. I.e., a honed surface is great for a hallway, entryway, or bathroom but will be higher maintenance for a kitchen or dining room floor where acid food spills must be wiped immediately. I&’d let the shower dry for a week prior to applying the sealer. The “general rule” discussed above still applies, however, floors, benches, shelves or anywhere you may store products are at the highest risk in the shower but still pretty low-risk. I am on vacation now, so letting the marble dry out for about 10 days. I&’m assuming the marble will be going on the floor of your shower? Try cleaning with acetone in a small area and see if it clears it up. When the tile gets saturated these iron deposits oxidize and the rusty water moves to the surface and evaporates leaving the orange rust stain. I can tell by the products that you recommend for maintenance on your site that you are very knowledgeable about how to care for your stone, keep up the good work!

poiished marbie tiies bathroom poiished marbie tiies ba

I know stainless steel is not supposed to rust (in theory) but it still does under certain conditions. It&’s on the floor, around the toilet, vanity counter, and shower floor walls and bench. A sleek, polished marble stays cool and temperature controlled – a surface perfect for rolling dough and creating delicate pastries! Similarly, mixing granites or other stones and polished marbles in a common pattern can also be problematic, as such combinations could eliminate the least costly marble polishing methods, requiring a more specialized process to maintain or restore it. But you shouldn’t let this scare you into choosing something you don’t totally love. The only thing not mentioned was that the grout is very porous and will soak up water even on the walls. It will simply keep water from absorbing to prevent oxidation of the iron deposits within white marble. Instead, a tumbled marble embraces a patina that fits well with old world, antique or rustic themes – it is used in large expanses or as decorative finishing.


Polished Marble Tiles Bathroom


Porcelain tile and marble are two elegant flooring options that often appear in bathrooms and kitchens.



Thus, any iron deposits within the tiles (unless near the surface) are not exposed to water long enough to oxidize or rust and stains rarely occur. You should be sealing inside the screw hole, but this won&’t completely stop a rust stain from developing. Make sure it&’s always in good shape and shouldn&’t have problems in the future. Why marble isn&’t the best option in a shower or bath.

Honed marble is different from polished marble in that is has a satin, smooth, velvety look and feel. It is important to make sure that the natural shades, textures, and variations in the tile truly complement your room and decor. With a large selection of sizes and accessories to choose from, this tile can easily be laid in a pattern or single layout and is suitable for residential and commercial installations.

Use water, mild bleach solution, and a small brush to clean your polished marble.

Even if you don’t need to add it to the entire house, it’s a fantastic choice for a bathroom area that will bring it a luxurious spa-like ambiance. The caulk has some ability to move with the house, so it doesn&’t crack. It is difficult to restore the sheen of polished marble when arranged with another finish that may be dulled or discolored by the same process. Some water may absorb into the marble or travertine tile while showering, but it quickly evaporates and does not cause any problems. A larger concern is the grout connecting the floor and the wall has pulled away from the wall, and water continues to get behind it. All “high traffic” areas are not created equal; therefore, a light marble with a honed finish would be more appropriate for those high traffic areas where spills are less likely. We have a newly installed hex mosaic honed carrara marble shower floor. Our cream / beige does have hints of off whites intermixed. The rust stains can happen with repeated cycles of slight water absorption into the face of the tile. We love the look of marble, but are afraid it will be too hard to maintain. We sealed it several time with he appropriate sealer but if we&’d been staying, we would have quit using it and ripped it out eventually. We were planning to use a marble lattice moasic on the shower floor.

The primary factor post-sealing would be the integrity of the grout. To keep that high sheen on a marble floor, maintenance polishing will be necessary to take out normal wear marks like fine etches and scratches. If available, ask for a sample of the material you’d like to put in your bathroom. This can happen with an improper installation, or more commonly, when there are cracks or voids in the grout. However, in a case where water gets behind the tiles of a sealed shower, it will block evaporation potentially making damage a lot worse. The best thing to do is to talk to your stone provider and ask for a product recommendation.

Please be sure to use products that are safe for cleaning natural marble.

Samples of this tile are available, enabling you to confidently choose the wall or floor tile of your choice. It may be that the sealer did not absorb well and/or residue dried on the surface. Such stains run through the full thickness of the tile, so it will be permanent. A honed finish is valued for its more muted, less formal look and is suited to floors in high traffic areas, as it is less prone to scratches than a highly polished surface. This is most often a problem on floors after a flood or from a plumbing leak.

However, for day-to-day cleaning, all you’ll need is a good microfiber mop. Also, some marbles, granites and other stones are naturally dense, stain-resistant and don&’t need sealing. The contractor just laid a carrara floor in our master bath & used an enhanced sealer. However, as you stated the marble has turned orange it may not be worth saving. Sealers don&’t form a topical coating, so it won&’t trap dust or dirt, but you want a surface free of gunk or debris to ensure easy absorption for the sealer. Though the type of finish will not impact the type of cleaning product used for short-term maintenance, your polished, honed or tumbled finish choice will indeed affect your long-term ability to keep the marble looking the same as the day it was installed. If so, the moisture and dye / color from the grout can absorb into the marble tiles creating a stain all around the edges which looks like a picture frame. Now, the proper thing to do first is perform the “water test” (see link above for instructions) to determine if your stone needs sealing or not. And it is super-effective cleaning the films that are the biggest problem in showers. But we&’re getting ahead of ourselves here assuming that applying a sealer is required. But if you want to go with repairing this one, then you need to stop using it for a week or two to let it dry out completely. That is why we took the initiative to gather some information about honed and polished marbles to give you a better understanding and to help you decide which finish is the right choice for you. Marble is often regarded as the most elegant of natural stone tiles.

Make a splash in your kitchen with marble tile in unusual shapes. Knowing where you want to employ this luxurious material for its attractiveness is only the first step – deciding the finish will be most important to the future of the stone in the application you choose. The amount of water absorbed during a shower is minimal and will quickly evaporate. If the water sits long enough the marble will absorb it even when sealed. The bench you may want to seal only because water and other products left over from showering or from leaky bottles set on the bench, etc., could cause a stain. Obviously, it would be absolutely useless to attempt to apply a sealer to a stone that can&’t absorb it and doesn&’t need a sealer. When the shower tiles and grout are in good condition the sealer will not cause any problems.

This article kept us from putting anything in our shower (floors, seating, walls). Of course, if you like you can apply a sealer to your marble shower tile. With most marble there is no need to seal simply to keep water from absorbing (i.e. After doing the lemon and oil test it seems i have a very hard polished marble that is not porus and does not have to be sealed like most other sights tell a person that they should.

However, white marble contains iron deposits that can cause rust stains with repeated water exposure, so white marble shower tile is the one exception where you do want to apply a sealer. They need to have homeowner&’s go through a contractors course before hiring anyone. However, it should not take days for the water to evaporate and the spot to disappear. The wall grout where the water bounces off of the person showering will soak up enough water to be pulled into the edge of the tile by gravity. Honing is both a starting finish and a process sometimes used later to restore damaged stone. It says polished marble does not absorb much so sealing in the shower is not necessary. Should we leave our cream colored travertine subway size tile on our shower walls and bench in the shower as is or follow the same rules as the white marble? Although it&’s good to seal your marble, the grout also needs to be sealed as well. Just be sure to apply the sealer correctly and do not allow it to dry, wipe off all excess after absorbing and then wipe the marble completely dry and buff out any streaks. Even though modern stone sealers allow the stone to breath, it is not the same as an unsealed tile and water behind a tile is effectively trapped.

You&’d have to leave a leaky bottle of something sitting on the marble tile for it to ever have a chance of staining. This is very helpful in areas like the kitchen, dining room or high use floors or countertops in a bathroom. If the water didn&’t penetrate the grout then it should not remain dark from the water, if it remains dark then the water has penetrated the surface of the grout and gravity will take it from there. Wait another 2 – 3 weeks to allow the grout to dry and any remaining moisture to evaporate and then apply a good sealer. I think the key here is that all parts used to install the door must be 100% stainless steel (not just plated), but then if possible, caulk around the screw hole to prevent water collecting and remaining around the screw. The more frequently you remove dust and grime, the less often you’ll need to use marble cleaner, and the longer your marble can go without sealing. I don&’t know why but this wasn&’t as obvious when the shower was wet. If the cool, rich, and elegant look of marble is what you desire, then your choice is simple.

Thank you for explaining how to care for your white, off white in our case, stone. Additionally, etching is less noticeable because the surface is already matte. Then they installed the shower door with a stainless steel screw. If you are considering using marble as a counter top, please be aware that acids from foods, such as lemon juice, can cause stains and etching. The natural strength of this stone also provides a long-lasting solution for years to come. With elegant white shades of natural marble in a polished finish, this tile creates a distinct pattern for install in kitchens, bathrooms and other residential or commercial spaces. However, the reflective characteristic of the finish makes it more prone to scratches. I can&’t do the water drop test, though, because the stone is only on vertical surfaces. That is assuming the installation was done well, grout is all tight with no cracks or voids that could have allowed water to get under the tiles. When a stone is already dense with low-porosity a sealer does not need to be applied. Applying a sealer to shower tiles is only a problem when water is getting behind the tiles. It is a white marble (with grayish tones and blue / gray veining).

Though it is possible to create a tumbled finish floor of marble tiles, more popular applications of a tumbled finish are as marble mosaics and backsplashes. For this reason, white marble tile showers should be sealed to prevent water absorbing and possible rust stain. Certainly in the marble shower, but possibly the floor, vanity top, etc. Then test any products that you use to be sure it won’t etch or stain the surface. Marble tile will darken or turn gray when water is absorbed. Once you are ready to purchase, be sure to add an industry standard of an extra 10% for cuts. Impervious flooring has water absorption of less than 0.5% for indoor or some outdoor use.

However, it is not a sponge and the amount actually absorbed (especially on a wall) is minimal, at the surface only, and will evaporate before it does any real damage. Water is likely trapped under the tiles and this needs time to evaporate. A honed finish is also suited to floors in high traffic areas, as it is less prone to scratches than a highly polished surface. I&’ve worked with it before its the best product for water proofing your shower! Our tile guy said we could use any kind of cleaner, bad advice. Etching in a shower 99% of the time is due to use of the wrong harsh cleaners (which is most common cleaners) to clean the marble. I read your blog about white tile needing sealing but saw no mention of double sealing. If testing shows absorption in less than 10 minutes on you floor and vanity, then it may be a good idea to seal it to guard against stains. You may have gaps, cracks or voids in the grout letting water flow behind the tiles where it gets trapped. It&’s the best financial option for now but what if we have problems down the road again? But also, it is very important to routinely inspect grout lines for cracks and voids.

This attractive tile features a mesh sheet that makes installation a much easier process. If you’re considering an upgrade for your flooring, marble makes any space much more luxurious. We asked the contractor to seal them as we were told to do so. Better to repair first, but you can always re-apply a sealer to any spots where etch marks were repaired. When water does cause damage it is nearly always because of cracks, voids or faults in the grout (or from poorly installed tile / grout) allowing a much higher volume of water to enter and get behind the tile. Here&’s the thing…lots and lots of people put marble in their showers and are happy.

This marble-inspired tile is great for interior or exterior use. And yes, you do want to apply a sealer to white marble in the shower. My only point is that the grout will be porous no matter what the tile is. Our experienced natural stone professionals will show you the beautiful array of colors and sizes of marble tile available. I just installed new marble tile in my bathroom on the shower walls and floor. And when the tile and grout have been sealed the evaporation of water behind the tiles is slowed even more. Why marble isn&’t the best option in a shower or bath.< I&’m not sure how the water exposure occurred in the first place. I didnt buy marble for my tub area for it to be another headach of having to baby another project around the house.


Porcelain Tiles Vs Marble Tiles Difference Between Porcelain Tiles And Marble Tiles


The only difference between porcelain tile and regular ceramic is that the clay used in 9, 4, wall tile , marble , pocket knife blade steel



No periodic re-sealing is necessary as is required with all other sealers. I just put stonepeak&’s statuarietto porcelain 12×24 tiles on my bathroom floor. I have seen marble showers where the water soaked in through the sides and down to the lower tile and a half, making the appearance of fish bowl waves.

This gives the marble a great resilience to scratching, making it perfect for high traffic areas and a more suitable marble for kitchen counter tops.

Love the marble (don&’t shy away from it just yet!) your shower looks beautiful sans the bad experience! Sorry for the long message, hate to see a homeowner go thru a tough experience, it&’ll get better! It is best to allow a polished marble to shine as the centerpiece of your beautiful flooring. It depends on the stone, the location and intended use of the stone installation.




Pick out fun shapes with a mid-century modern spin that will bring your living space a fresh new look.

The choices of colors and looks that this surface comes in can overwhelm you, but one major deciding factor other than its aesthetics is its finish. We decided to stop showering in that shower to see if it eventually would dry out so for the past four months we&’ve been showering in the main bathroom. Right or wrong, we&’ve got a bigger problem on our hands that we didn&’t anticipate. Polished marble often is very slow to absorb, and thus, at very low risk for staining. However, with white marble you have possible iron deposits in the marble that can rust if exposed to water causing rust stains on your marble shower tile. Still not too big a risk on the bench, but probably the most likely place in your shower (along with shelves) to get a stain and easy to seal it.

Because its charm is an aged appearance, a tumbled finish marble is ideal for high traffic areas, even those where spills are possible, as well as areas where a textured surface is helpful, such as in the bathroom where a smooth tile or slab is slippery when wet. Polished marble is versatile in application – it may also be commonly found in slabs for beautiful countertops. So, expecting a sealer to protect against this is like expecting car wax to prevent a scratch in the paint from a key or some other hard object. While you are at it, ask if they can recommend a good natural stone cleaner as well. For nearly all other stone the water itself is not a problem and usually sealing a shower is unnecessary. The additional texture of a tumbled marble adds depth and variety to a room. We&’re not sure if things were installed to code but at any rate, it looks like some of the materials were a bit cheap. Bits of stone are removed in this process to leave the surface smooth, leaving the appearance matte and the stone color slightly lighter than before finishing.

Not the entire floor though, just the area where the water hit directly, both on the floor and the wall. I don&’t know if it was the installer or if we just got lucky. The sealer will not prevent you from removing any future stains. What is the best sealer for grout and tile in a marble shower? If you really love the look of natural stone, you won’t mind a little extra work now and then. Like any natural product there will be always be some maintenance that&’s just part of the deal! When it comes to choosing the perfect material, marble tile is an excellent choice. Marble tile is no longer just reserved for fancy mansions or luxury estates.

Therefore, when honed marble does get scratched, it is not obviously reflected when light hits it. This elegant white mosaic tile with a natural stone look is made with the “color body” technology and adds class to a contemporary aesthetic. Well, there you have it, an overview of some general—but important!—facts to know about honed and polished marble. Very happy with both the seller and the marble tile itself. Our marble tiles are available in numerous finishes, including polished and “honed” which offers a more rugged, “less-than-polished” look. Wall tile is a natural stone marble with a brilliant mix of gray and white tones.

This attractive tile features chips of natural marble tile in a herringbone pattern on a mesh sheet that makes installation a much easier process. Tile is a popular floor covering, backsplash material, or used as a focal point around a fireplace. In truth, the sealer itself won&’t “cause” a problem out of nothing, so don&’t worry if you&’ve already sealed your marble shower. I suggest applying a sealer to all surfaces that will be regularly exposed to water. However, the finishing process opens the stone’s pores – which makes it more vulnerable to staining. No need to polish marble prior to sealing unless you are repairing etch marks. We&’ve just installed white arabescato marble in a bathroom. A simple test would be to towel off those areas after showering. White marble is the exception since it can contain iron deposits that can cause rust stains with repeated exposure to water. First, marble is not that absorbent and water would have to be on the surface for quite a long time (maybe 15-30 minutes or more) before it even starts to absorb. There are some cool new things being done in porcelain today, such as finishes that look like natural stone or wood planks. Water getting behind the tiles will only occur when there are cracks or broken grout lines. It is also a less slippery alternative, making it a great option for living areas. It concerns me you didn&’t hit a waterproofing membrane at the bottom course of tile, as the shower pan system should wrap up the wall and create a “bathtub” at least 6″ in height in case your shower ever has standing water! Dirt and scratches will affect the ability of marble to reflect light, but with a tumbled finish, the surface is not intended to reflect light. Now whenever we take a shower in it, the area where the water hit stays and looks wet and darker.

Not all of us can live in mansions and palaces, but one way to create a sense of grandeur in your humble abode is by simply adding marble. As is with honed marble, you must immediately wipe off any stains because certain substances will etch the surface, like toothpaste, for example. Meaning the tiles and the iron deposits must be exposed to water over an extended period of time or from a continuous source. I do not know how to proceed with preparing this area before moving on to the sealing. We unknowingly used some cleaners that produced a few etch marks before reading up on the proper care of marble. Water can oxidize these deposits, which may lead to a rust stain that is difficult to remove.

The real reason you might want to seal marble shower tiles prior to grouting is if the grout is a darker color than the marble. Such marks are expected when marble is underfoot and supporting furniture. I already have noticed the marble turning dark gray just from them getting water on the tile from a sponge or spilling water from a bucket. And the granite counter tops are a dark gold, brown & black, so, nothing to do there! It lends a classy, high-end look to any room and is impressive when used in highly visible areas. The shower went unused for a good 3-4 weeks from install before we started using it.


Product Full Polished Glazed Tiles Yh





For the above reasons, it is unwise and unnecessary in most cases to seal stone or grout in a wet environment (except for white marble tile showers). The shower was leaking water into the crawlspace like crazy and once we figured out that the grout and hadn&’t failed and that the plumbing hadn&’t failed, we figured out that the tiles themselves were letting the water seep down. The result is wasted time, effort and money and a streaky sealer residue on the stone. It has a sort-of translucent quality that lets light penetrate the surface and give off a glowing quality. They’re made differently, they feel differently, and they certainly look differently.

There are several easy polishing methods to beautify marble (powder polishing and crystallization polishing among them), but it is important to note that polished marble should not be mixed with marble finished in other ways, such as honed or tumbled surfaces with polished marble in a checkerboard pattern. Or it could be that the shower / bathroom does not have sufficient ventilation / air flow to promote evaporation. Instead, use mildly abrasive household detergent with bleach. This tile is constructed from durable marble material and is ideal for a variety of wall or floor applications. Consequently, honed marble soaks up liquids spilled during cooking faster and easier.

To clean honed marble, one must never use regular soap because it will seep through the surface and darken its color.

Grade 1, natural marble tile for floor, wall and counter top use.

Source: ceramicyhh.com/index.html

Source: ww4.ggpubs.com/
genaMarble Images
This product is specially formulated for use on marble, travertine and all natural stone without any damage or etching. I.e., a honed surface is great for a hallway, entryway, or bathroom but will be higher maintenance for a kitchen or dining room floor where acid food spills must be...