Reach out to the author: contact and available social following information is listed in the top-right of all news releases. Impregnating sealers work below the surface, so they need to absorb, but then you wipe the residue off the surface before it dries. Now, there are several variables that factor into the frequency for applying a granite sealer but most granite countertops will go 3-5 years, some up to 10, some 15 years and beyond and some granites never need sealing at all. Applying a granite sealer is simple procedure, which is why we encourage homeowner’s to do it themselves and save a bunch.

But since we are talking about a natural product, variations can exist and you can’t absolutely say yes or no, which is the reason to perform the water test for sealing granite countertops. That way you can rule out slabs that are too porous or that etch, which would be problematic in a kitchen. The vast majority of granite countertop colors or varieties will only require one coat to effectively seal the surface. The way you determine if any stone is sealed effectively is to perform the water test for sealing granite countertops (see link above). The fact that standard/non-permanent sealers degrade is the reason a “cleans and seals” product exists. Kind of reminds me of running around the house trying to find my hat only to discover it on top of my head!

However, if severe enough your only option is to call in a professional to re-polish the surface. Applying a granite sealer to dense granites or polished travertine or marble when testing shows you should not only creates a problem you definitely don’t want.

This simple sealer test sums it all up and tells you if you should apply a granite sealer or not either initially or for re-application. Applying granite sealer is a simple procedure and you should not let it be a factor when deciding whether to install granite or quartz counter tops.

There’s definitely a demand for it and there’s nothing else like it out in the marketplace. There’s certainly some confusion and mystery out in the marketplace and online about the whole topic of sealing granite countertops, but there needn’t be.

The only mistake people make when applying a sealer is letting it dry on the surface, which is easily avoided. It would be best to clean / scrub the surface a time or two with acetone or mineral spirits (neither will harm granite at all) to remove any residue.

Sealing granite countertops is as simple as painting a wall and you should use pretty much the same precautions and preparation. This will be the only granite in my house, and it will only be approximately 8 square feet total in two separate 4 sq. And the smart move when shopping for stone is to perform the water test (or better) lemon juice test (since this will also test for etching) on the exact slab you intend to purchase.

Such concerns aren’t as important in a bathroom, but with so many granite and stone varieties and colors to choose from no need to install an overly absorbent slab, etc. Therefore, you may need 2 or 3 coats of the granite sealer before your granite countertop is actually “sealed”. The fact that water is still readily absorbing causing dark spots is an indicator that you haven’t actually sealed the surface.

What granite countertop sealers do is dramatically increase the time it takes a liquid to absorb so you have more time to clean it up before it stains.

However, under “normal” circumstances most liquids and oils will evaporate before staining when a top sealer has been properly applied. That’s why you need to test to determine when applying a granite countertop sealer is appropriate.

All sealers are not equal and a few are able to protect your countertops for 10 to 15 years when properly maintained. This type of product can be used weekly or for end of day cleaning to keep your countertops shiny and streak-free.

Bottom line is that the differences between granite and quartz are so insignificant that you should simply install the color and pattern you like best whether granite or quartz.





new senguard granite sealer 1 4

Source: www.adhesivesandsealants.com/doc/new-senguard-granite-sealer-do-it-yourself-0001
https://www.marble-restoration.com/wp-content/uploads/2017/11/new-senguard-granite-sealer-1-3.jpghttps://www.marble-restoration.com/wp-content/uploads/2017/11/new-senguard-granite-sealer-1-3-150x150.jpgZenGranite
Reach out to the author: contact and available social following information is listed in the top-right of all news releases. Impregnating sealers work below the surface, so they need to absorb, but then you wipe the residue off the surface before it dries. Now, there are...