Yes, we recommend that all customers come in and view the current batch of natural stone, as every batch varies.

When you visit our premises you will see large natural stone slabs that are stacked in frames.



There are approximately 7 slabs (a bundle) in each space. The 7 slabs in the bundle have been produced consecutively from the same block of stone and are therefore very similar. The slab facing will be fully representative of the 6 slabs behind. We recommend that you do not cut on your stone tops.Never place hot pots or electric skillets on benchtops.

Whilst having limited heat resistant the stone can damage if very hot items are placed on the surface for an extended period of time. No, price is no indication of quality or durability. The price of stone is based on many factors such as quarrying location and cost, logistical cost, but the main factor is simply supply and demand. Marble needs to be sealed with a good quality penetrating sealer, as it is a more porous stone. Basically, sealing gives you time to clean up spills before they stain the stone.

What Is Sealer For Granite, Marble, Quartzite And Travertine Countertops?

What is sealer? How is sealer applied? How long does sealer last? How will I know when to re-apply sealer? Does sealer make …

A penetrating sealer soaks into the micro pores of the stone to reduce the ability of spills to stain the stone. Penetrating sealers do not alter the appearance or gloss level of the stone. Penetrating sealers will not protect marble from etching (dull spots) as this process is a reaction between the acidic product and the very top surface of the stone. Make a visit to your stone fabricator explaining what has happened and they will assist you in re-sealing your top. Whilst not practical as other surfaces, marbles are very beautiful and are a popular choice for tops.

It is often a matter of selecting the right stone for your lifestyle and what your priorities are. Honed finish is where the surface is not polished to a high gloss level, but rather to a more conserved matte finish. Never use harsh cleaners on your stone surface. Sealants block liquids from seeping into the granite. A properly sealed countertop will cause liquids to bead on the surface. Pizza grease can be a culprit, too, when it soaks through the bottom of the pizza box and onto the countertop. In small areas where the faucets, sinks and stovetops lie, you should apply sealer after the countertop is installed. Generally, you should seal most kitchen granite countertops annually. Keep in mind that different pieces of granite have different porosities.

Some countertop areas may need to be sealed more often than others.

To determine if it’s time to reseal a countertop, dribble some water onto the countertop. If the water soaks into the granite, it’s time to reseal. When sealing, work in small areas, allowing the sealer to absorb for the recommended amount of time before applying the second application. Before making the decision about granite countertops, it’s important to know the benefits and costs.

Read on to learn about the pros and cons of granite countertops.

Granite countertops are so durable they can literally outlast the building in which they reside. Can you guess what material is the most popular for creating an everlasting on a headstone? For this reason, look for products in the class known as impregnating stone sealers.

They are chosen by professional contractors for sealing granite, marble, and slate countertops.

How To Seal Granite Countertops

It also resists the penetration of oil, the liquid that most easily stains natural stone countertops.

Allow the counters to dry before proceeding. When completely dry, use another clean, dry cloth to apply the sealer. Wet the cloth with impregnating sealer, and wipe the sealer onto the surface of the counter. Make sure the entire surface including edges and backsplashes are wet but not soaked. When the second coat is dry, your stone countertop sealing job is complete. The full repellant effect is achieved within 24 hours, so wait a day before preparing food on the countertop. When properly sealed with an impregnating product, the surface of your slate, granite or marble countertops will repel moisture and oil, virtually eliminating the risk of stains.

However, it still makes sense to dry spills on the countertop and clean oil from them promptly . The results will be the lasting beauty and durability of your stone counters in the years ahead. The schedule for resealing granite countertops depends on several factors.

In recent years with the advent of advanced natural stone sealers, the maintenance of granite has become much less demanding. If you cook frequently in your kitchen and use the countertops daily, you might need to reseal the granite even more frequently. This used to be the advice from stone professionals over the years.

The way you maintain your granite counter can also have an effect on the frequency of resealing. If you use chemicals on the granite that wear away or weaken the sealant, you will need to reseal more often. The best and harmless way to clean granite countertops on a regular basis is a mix of warm water with a spoon of mild hand soap. The higher density makes the granite less porous and less at risk for staining. Dark granites also hide small stains and imperfections more readily than lighter granite counters.

The Water Test

Look for a sealant with advanced chemical technology, which will enable it to form a more permanent bond on the granite. Gallon cans be purchased at a very reasonable price and that will last for 2 to 3 years of regular cleaning usage. Revitalizer liquid has traces of sealant mixed with it. Every time you are cleaning, you are also replenishing the traces of sealant that are lost by wear and tear. Drop a few droplets of plain water onto the granite and watch to see what happens over the next five minutes.

If the water remains in beaded droplets on the surface of the granite, the sealant is protecting the granite. If you return to the counter and find the droplets gone because they absorbed into the granite, it’s time to reseal your counter. Wash the granite with mild dishwashing soap and rinse it well. Wipe down the granite with acetone to remove any cleaning residues, if necessary. Spread or spray on the sealer and allow it to absorb into the granite. After the recommended setting time (15 minutes), wipe away the excess sealer with a clean cloth.Your granite counters should be ready to use 24 hours after sealing it. Granite differs from granodiorite in that at least 35% of the feldspar in granite is alkali feldspar as opposed to plagioclase; it is the potassium feldspar that gives many granites a distinctive pink color. Sealing granite is recommended to seal for stain resistance and maintenance purposes.

Light coloured granites are more likely to suffer from water soluble minerals (including picture framing effect) being absorbed through the back of the stone during installation. This is to act as a grout release and assist in the grout clean-up process.

If the surface is smooth (polished, honed) than applying a coat of the final sealer you select is recommended.

You should seal your granite or marble countertops once every year. Instructions for sealing granite counter top the right way are …

A minimum of 3 days for the the grout to cure and harden, and no longer than 10 days or it may need to be mechanically removed. This product is a blend of absorbent clays that can be mixed with water or an appropriate chemical to extract the stain from within the stone. There are many varieties of granite, and a large percentage of them are actively harmed by sealer. That said, if your granite does absorb water or oil rapidly, a penetrating sealer will make maintenance much easier. There is no such thing as a safe, stain-proof sealer for granite, but a good sealer will give you the time you need to wipe up spills before they are absorbed. Note that sealing has nothing to do with how shiny your countertops are; this is caused by polishing . Do the lemon juice test to see if there’s a deeper problem. Apply a few drops of lemon juice onto the granite. Take a look at the granite underneath the drops.

If dark spots are developing within the first minute, set down the sealer! Select a penetrating sealer for natural stone. The next best options use “siloxane” or “silane,” which tend to be a little worse at repelling oil. Avoid silicone-based sealers or linseed-based sealers.They are the least durable and will need to be resealed every eight months or so, and can sometimes even cause color deterioration. Some sealant chemicals can be either water-based or solvent-based. The method below provides more detail than most labels will give you, but always go with the label if the two sets of instructions contradict each other. Use a degreasing product, then do a final clean with denatured alcohol. Dust from construction can interfere with the sealer’s protection. Solvent-based sealers may produce unpleasant or harmful vapors during application, so open a window and put on a pair of gloves.

Don’t worry; the sealer will not leave any harmful chemicals in your kitchen. Choose an, unobtrusive corner of the granite, perhaps where a microwave or other appliance is normally located. If the sealer leaves a hazy residue or discolors the granite, find a different product. Cover the surface evenly with the spray bottle, or using a completely clean, sealer-dampened, lint-free cloth or brush if the sealer is not in a spray bottle. The entire surface should be damp, but not soaked. Check your instructions for the exact time, as leaving it on too long can cause discoloration. Typically, the sealer needs about 20 minutes to soak into the stone, but trust the label for this one. If the label directs you to add a second coat, this is usually done when the first coat is almost, but not completely dry. Wipe this over the surface to ensure even application. After you leave the sealer on for twenty minutes or as long as the label direct, wipe up the remaining sealer with a clean rag. Too much sealer left on the counter can cause an unattractive haze. This is another number that depends on the exact product, but the sealer will need to “cure” for some length of time before it is effective. Some products cure after an hour or two, but it’s still a good idea to avoid washing the counter for the first 48 hours after application.

How To Deep Clean Granite Benchtops

Honed granite, yes, but not polished granite. That is the easy way to tell if it is honed or polished. It works best for cornered granite, but may not look as real. You could also look into new granite for deep pits.

The sealer is like waxing a car, it creates a thin film that prevents liquids from penetrating for a certain period of time. Make sure you wipe it up, as otherwise it will stain. We have a dull spot on the counter top, how do we remove it? Can you wipe granite down with mineral spirits before sealing it? Never reapply without trying the water test first. If a sealer leaves a haze on our granite, try adding a little more of the same solvent to dissolve the dried, hazy sealer again, then wipe it up immediately. An actual, stain-proof top sealer is a terrible option for granite counters, as stone needs to “breathe” to prevent cracking and other damage. Next, evenly spray a penetrating sealer product made for natural stone on the countertop until the entire surface is damp, but not soaked. Wait 20 minutes, then wipe excess sealer off with a clean rag. Apply a second coat if needed, then give the countertop 48 hours to cure completely! The vendor who sold us the granite told us it did not need to be sealed, unless it exhibited absorption issues.

Granite is durable, resistant to daily life and easily cleaned – but this does not mean it doesn’t require a little bit of love. Granite needs to be thoroughly cleaned every once in a while, in order to maintain that perfect just-installed appearance. It’s important to know how to treat your granite. Some come from the factory with a resin treatment. You should consult the manufacturer of your countertop for the recommended treatment. Since granite is porous, a sealer is there to protect the granite from potentially harmful materials that can affect the appearance and lifespan of the granite. Regardless of the type of granite or seal, what doesn’t vary is what you should not be cleaning your granite countertops with. You should avoid using acid-based cleaners — lemon, orange, vinegar or bleach-based — on granite. The acids contained in these cleaners will degrade the sealant and can leave unsightly stains on the countertop. All you need is a wash cloth, warm water, a small amount of dish soap and a hand towel for drying. Use the warm, soapy dish cloth to wipe up spills or other grime immediately.It’s also good practice to do this any time your cook in your kitchen, if not daily. If you want to disinfect your granite, simply mix equal parts isopropyl alcohol and distilled water in a spray bottle. Thoroughly spray the countertop and allow the solution to sit for 2 to 3 minutes.

This should also restore your granite’s brilliant shine. Slather the paste over the stain and allow it to sit on the surface for several hours, covered. When you’re ready to clean it up, wipe away the paste, and clean with a warm wash cloth and a small amount of dish soap. Granite countertops are more porous than quartz countertops, but not all granites are created equal . Note the time that you placed the water on the counter and time the water to see how long it takes to absorb (the granite will darken). Multiple layers of sealer needed, but only redo every 3-5 years.

Use this water test again before reapplying. Apply a single layer of sealer; may be many years before reapplication is needed. If you only have to seal your granite countertops once in a while and you love the look of granite, go for it! We are locally owned and operated and are committed to serving you! We are finally at a point that feels like we can afford it, so we are going to pull the trigger. I didn’t realize that certain granite needed to be sealed to prevent water damage, as opposed to a quartz countertop. At 30 minutes it had absorbed about 25 % of the water. It appears to bead immediately but obviously after 30 min there is some absorption.
benchtop sealer what sealer for granit

https://www.marble-restoration.com/wp-content/uploads/2019/02/benchtop-sealer-what-sealer-for-granit.jpghttps://www.marble-restoration.com/wp-content/uploads/2019/02/benchtop-sealer-what-sealer-for-granit-150x150.jpggenaGranite
Yes, we recommend that all customers come in and view the current batch of natural stone, as every batch varies. When you visit our premises you will see large natural stone slabs that are stacked in frames. There are approximately 7 slabs (a bundle) in each space. The 7 slabs...